wheat roller flour milling plant machinery
Everyone knows that competition in the wheat roller flour milling plant machinery industry is fierce. It is because this industry can bring great benefits that it has attracted many competitors to seize it. To improve the production efficiency of equipment and extend the service life of equipment, manufacturers also need to pay attention to the maintenance and upkeep of flour mill machinery.
How to do wheat roller flour milling plant machinery daily maintenance work?
wheat roller flour mill
wheat roller flour milling plant machinery
1. Always check the tightness of the transmission belt. If the belt is too loose, it will reduce the transmission efficiency and affect the grinding effect. If the belt is too tight, it will easily cause the bearing to heat up, increase power consumption, and reduce the service life of the transmission belt.
2. The various transmission components of the wheat roller flour mill are fastened reliably. Tools should be used for disassembly or installation. Direct hitting with hand hammers and other tools is prohibited.
3. Check the bearing temperature frequently. If the temperature is too high, check whether the lubrication and transmission parts are normal, whether the rolling distance is too tight, etc. Find out the cause in time and take corresponding measures. If the situation is serious, stop the machine for inspection.
4. Replace the grinding rollers regularly and orderly. Do not replace too many grinding rollers at one time. At the same time, the diameter of the grinding rollers cannot be too different. The angle, slope, and number of teeth of the toothed rollers must comply with the regulations, and a certain tooth top plane must be left. The taper of each section of the smooth roller must be accurate and meet the specified requirements, and the surface roughness must be uniform. After replacing the grinding roller, check with a feeler gauge and roughly adjust the rolling distance according to the requirements of each flour mill system.
5. After starting up the wheat to flour machine, always check the pneumatic components in the air circuit, whether there is air leakage or damage in the air circuit and the joints. At the same time, check whether the air supply pressure meets the requirements. The use of the synchronous belt should also be checked frequently. If it is found that it is too tight, too loose, bounces, deviates, or is seriously worn, it should be adjusted, repaired, or replaced in time.
Wheat processing plant processing technology
The complete set of wheat flour processing plant consists of four major systems, namely, skin grinding system, heart grinding system, slag grinding system, and flour cleaning system. Each process has its own milling process characteristics. These are technologies based on traditional milling processes and do not damage the nutritional value of the raw grain itself.
Milling is a complex and important step in the flour production process. This process is to separate the endosperm from the wheat bran and wheat germ as much as possible, grind the endosperm into small and fine particles, and remove the cortex as much as possible to maximize the Make full use of wheat resources.
Manufacturers can adopt different flour milling processes according to their own needs. Our wheat roller flour machinery manufacturers will continue to develop flour machinery technology to meet the needs of the people and continuously improve the quality and technology of the machinery.
200tpd wheat flour processing machine
In addition, in the wheat roller flour milling plant machinery production workshop, we also need to keep the environment clean. After all, flour is the material we eat daily, so hygiene and safety must be done well.
